Publications

Direct correlation of local fluence to single-pulse ultrashort laser ablated morphology

H. Sakurai, K. Konishi, H. Tamaru, J. Yumoto, and M. Kuwata‑Gonokami, Communications Materials 1 (2) (2021).

Dual Channel Microfluidics for Mimicking the Blood–Brain Barrier

B. Buchroithner, S. Mayr, F. Hauser, E. Priglinger, H. Stangl, A. R. Santa‑Maria, M. A. Deli, A. Der, T. A. Klar, M. Axmann et al., 2 (15), 2984-2993 (2021).

Functional surface formation by efficient laser ablation using single-pulse and burst-modes

A. Žemaitis, M. Gaidys, J. Mikšys, P. Gečys, and M. Gedvilas, in Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXVI, C. Molpeceres, A. Narazaki et al., eds. (SPIE, 2021).

Optimization of the ablation process using ultrashort pulsed laser radiation in different burst modes

D. Metzner, P. Lickschat, and S. Weißmantel, Journal of Laser Applications 1 (33), 012057 (2021).

Quantifying end-face quality of cleaved fibers: Femtosecond laser versus mechanical scribing

M. A. A. Mamun, P. J. Cadusch, T. Katkus, S. Juodkazis, and P. R. Stoddart, Optics & Laser Technology 141, 107111 (2021).

Smart Inlays for Simultaneous Crack Sensing and Arrest in Multifunctional Bondlines of Composites

C. von der Heide, J. Steinmetz, M. J. Schollerer, C. Hühne, M. Sinapius, and A. Dietzel, Sensors 11 (21), 3852 (2021).

Efficient ablation by ultra-short pulse lasers

A. Žemaitis, P. Gečys, G. Račiukaitis, and M. Gedvilas, Procedia CIRP 94, 962-965 (2020).

Femtosecond laser direct writing of perovskite patterns with whispering gallery mode lasing

X. Tian, Y. Xu, H. Zhao, X. Qin, Y. Nie, W. Li, S. Liu, Q. Lin, and Q. Cao, Journal of Materials Chemistry C 22 (8), 7314-7321 (2020).

High-quality surface treatment using GHz burst mode with tunable ultrashort pulses

D. Metzner, P. Lickschat, and S. Weißmantel, Applied Surface Science 531, 147270 (2020).

Micromachining of Invar Foils with GHz, MHz and kHz Femtosecond Burst Modes

S. Butkus, V. Jukna, D. Paipulas, M. Barkauskas, and V. Sirutkaitis, Micromachines 8 (11), 733 (2020).

1

2 Next