OPA software update. WinTOPAS OPA software and TOPAS_API library updates. System requirements, update steps and downloads.

WinTopas, software, OPA, update, download, system requirements, upgrade, driver. WinTOPAS software.

OPA Software Update

Software
File Versions Date
WinTOPAS Software Package with change log WinTOPAS application ver. 3.3.51
TOPAS_API library ver. 3.3.51
2016.08.18
System Requirements
  • Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 (both 32 and 64 bits editions).
  • Note: TOPAS LPT motor boards do not work on 64 bits editions.
  • Computer with Pentium II or better processor.
  • 128 Mbytes RAM (512 Mbytes recommended).
  • 16 Mbytes of hard disk space.
  • SVGA color adapter (16 bits or more colors depth recommended).
  • USB 1.1 or USB 2 port.
Upgrade Steps
  1. Check the software version of your currently installed WinTOPAS software (can be found under Help>About)
  2. If upgrading from WinTOPAS version 1.x or 2.x:
    1. zip the files in the Topas program folder (in particular, files with extensions *.ini and *.crv).
    2. e-mail the files to support@lightcon.com stating the serial number(s) of your device(s).
    3. Allow us 3 – 5 business days to upgrade your files to WinTOPAS 3 format.
  3. Download and install the software package from the above table.
  4. For USB control cards: install the driver following instructions in WinTOPAS Manual, Appendix 1 (the manual can be found in WinTOPAS installation folder, “Documentation” subfolder).
  5. Start WinTOPAS software and follow these steps (more details can be found in the Manual):
    1. Select "Service"->"Access level" menu option. Choose "Advanced user level" option and enter password "1600". Press "Ok" button.
    2. Select "Devices"->"Load/Unload Devices Configurations" menu option. Press button "Select" in "Configuration for Device 1" section and browse to *.ini configuration file. Press button "Open" and then "Apply" (for LPT motor boards TopasLPT.sys driver will be installed automatically).
    3. Select "Curves"->"Load/Unload Curves" menu option. In OPA/NOPA curve section press button "Load" and browse to *.crv file. Press button "Open". In Mixer 1 curve section press button "Load" and browse to Mixer1 *.crv file. Press button "Open". In Mixer 2 curve section press button "Load" and browse to Mixer2 *.crv file. Press button "Open".
    4. Exit "Load/Unload Curves" dialog, reset motors and set any wavelength value. (Reset is performed from "Direct Access" window). Check output energies at a few wavelengths.

OPA software update. WinTOPAS OPA software and TOPAS_API library updates. System requirements, update steps and downloads.

WinTopas, software, OPA, update, download, system requirements, upgrade, driver. WinTOPAS software.