. TOPAS-White.

Non-Collinear Optical Parametric Amplifier

img

Features

  • Pulse duration down to 15 – 20 fs
  • High energy visible output (> 60 μJ @ 550 nm)
  • Tuning range from 250 nm to 1000 nm, computer controlled
  • Built in pulse compressor
  • High output stability throughout the entire tuning range

Overview

TOPAS-white is a high energy two amplification stage non – collinear OPA (NOPA) with built in pulse compressor. A non – collinear pumping scheme of an OPA is used when the collinear approach reaches its limits in respect to broad spectral bandwidth and/or extremely short pulses (< 20 fs). The basic principle of operation of NOPA relies on parametric amplification of chirped signal produced by supercontinuum (white-light) generation. The non-collinear geometry is used due to broad amplification bandwidth in the visible spectral range.

TOPAS-white has a unique optical setup, which allows pumping the device with more than 200 μJ of energy and achieving more than 60 μJ of output at 550 nm.

Output Specifications are given for:
  • 800 nm
  • 0.5 mJ
  • 35 fs
  • Gaussian beam pump at 1 kHz

Note 1:
Pump pulse duration and wavelength affects the specifications. Check the specifiaction with us if the wavelength or the pulse duration differ from above values.

Note 2:
TOPAS‑White output energy scales up linearly in 0.3 – 1 mJ range, provided the device is installed and optimized for a particular pump energy (the device has to be re-optimized for optimal performance should the pump energy change more than ±10 % from the installation value).

Pump Laser Requirements
TOPAS-White (500 – 1000 nm)
UV-VIS Extension (250 – 500 nm)
Output Specifications are given for:
  • 800 nm
  • 0.5 mJ
  • 100 fs
  • Gaussian beam pump at 1 kHz

Note 1:
Pump pulse duration and wavelength affects the specifications. Check the specifiaction with us if the wavelength or the pulse duration differ from above values.

Note 2:
TOPAS‑White output energy scales up linearly in 0.3 – 1 mJ range, provided the device is installed and optimized for a particular pump energy (the device has to be re-optimized for optimal performance should the pump energy change more than ±10 % from the installation value).

Pump Laser Requirements
TOPAS-White (500 – 1000 nm)
UV-VIS Extension (250 – 500 nm)

Products List

. TOPAS-White.